Kasa Camera Blinking Orange Light: How to Fix It?

Generally, Kasa cameras are the best security solutions and are suitable for your home and official places. Additionally, users are not aware of the LEDs of their cameras and the issues related to them. For example, if you notice that the Kasa camera blinking orange for a long time, you must know that there’s some issue with your camera.

Similarly, the flashing orange & green light means the device is waiting for setup. You must go to your mobile device’s Wi-Fi network and find the camera’s local network to start the configuration. On the other hand, the orange light blinking for too long means that the Kasa camera has not connected to the network or has a power outage.

Therefore, you must resolve it as soon as possible and set up the camera again, right from scratch. However, there are several ways to fix this error but before resolving it, we need to understand the reasons behind this camera issue. For more information, stay tuned here!

What are the reasons for the Kasa camera blinking orange?

As we already discussed the reasons behind this orange light on the camera are variable which we list down below:

How to troubleshoot the Kasa camera blinking orange issue?

Moreover, there are different methods that you can use to fix the orange light error. Also, if you use the Kasa smart app, then you can also resolve this error. Additionally, on the computer, you can use all the methods but on the app, you can simply remove the device. Moving back to the point, in this section we will explain the steps that you can employ to fix this error.

Check the power supply

Ensure your camera is sufficiently charged, if not then check the power outlets and adaptor.
Don’t plug in the power cable or adaptor to a broken or burnt socket.

Fix the network errors

Check the network connectivity on your router and camera as well.
If you are using the app, then must find that it is updated and responsive.
If the network is unstable then use an Ethernet cable for a wired internet connection.
Sometimes, issues are from the ISP side due to local area network management, hence, contact the authority.

Update the Firmware

Simply, check the Firmware update on the app.
If it pops up, then download the current and compatible version of the Fimnrware as per the camera model you use.
Now, you can update it and refresh the camera.

Reboot your Kasa camera

If the camera shows bugs, glitches, or any other errors like an orange light, then reboot it.
Plug out the camera and off the powerhouse.
Wait for 30 seconds and plug the devices back as you plugout them.

Examine the network cables

Sometimes errors may occur if network cables are not connected properly or are damaged.
So, tighten the loose cable connections.
If any of the cables is damaged, then replace it immediately.

Hard reset your camera

Firstly, ensure your camera is powered on.
Now, tilt the lens up to look at the reset button.
Next, press and hold this button for at least 15 seconds.
When LED blinks Amber, release the button.
It will show that the reset process is completed and you need to reconfigure it.
Keep in mind that the reset button on some Kasa models is present as a Sync button.

Fixing the orange light issue using the Kasa Smart App

Option 1: Go to the Devices page

On the Devices page, swipe your camera left. To remove the camera, hit Delete, and then tap “Remove Device” at the bottom. Your TP-Link account will be closed, and the camera will be returned to its original configuration.

Option 2: Visit the Page of “Device Settings”

Make sure your camera can be powered on to perform this action.
On the Devices page, tap on your camera or tap the Gear icon to go to the Device Settings page.
To remove the camera, tap Remove Device at the bottom, and then make sure you do it twice.
Your TP-Link account will be closed, and the camera will be returned to its original configuration.
Do not run camera after power-on, wait 10 minutes and try to reset it again.

Wrapping It Up

On the whole, the Kasa camera blinking orange issue can now be resolved. In this guide, you will find all the necessary information with complete steps that may help you to fix this error.

You can walk through the troubleshooting methods and also understand the causes behind this error first. As an alternative, you can use the Kasa Smart app to delete the camera. If you are unable to accomplish what is indicated, make sure the camera is turned on and wait ten minutes before heading to a reset. Still looking for more information? Approach us here!